Stereo output
8 Ohms 1150 watts
4 Ohms 1900 watts
2 Ohms 2750 watts
Bridged Mono @ 1kHz 1%THD
8 Ohms 3800 watts
4 Ohms 5500 watts
Input Sensitivity 1.23 Vrms (+4 dBu) for full power @ 4 Ohms
Input Impedance 30K ohms Balanced/15K ohms Unbalanced
Frequency Response 0/-0.5dB 20Hz - 20kHz 0/-3dB 5Hz - 60kHz
Signal to Noise Ratio Better than 100dB (20Hz - 20kHz)
Distortion (SMPTE-IM) Less than 0.03%
Output Circuitry 3-tier class H
Cooling Dual continuously variable speed fans front to rear
Protection Short circuit thermal current limit DC offset RF protection
AC soft start with inrush current limit turn on/off muting
Connectors Input Combo female XLR & 1/4” TRS jack. Link Male XLR
Output Both 5-way biding post and Speakon?
Controls Front Power on/off switch volume controls for each channel
Rear Mode switch (stereo / parallel / bridge) HPF 30Hz/50Hz/Off
Limiter on/off LED STRIPS on/dim/off
Indicator Power parallel bridge. Each channel Signal -20dB -10dB clip protect
Power Requirements 120/230V 60/50Hz factory configured
AC consumption Both channels driven at 4 Ohm load at 120Vac (for 230V divide by 2)
AC connect 120V fixed cord - NEMA 5-20 plug 230V IEC inlet on chassis power cord with CEE7/7 plug
Dimensions 19'' (482mm) x 5.25'' (132mm) x 19.3'' (492mm)
Net weight 81.5lb (37kg)